Thermoworks RTR-500NW/AW WIRELESS LAN OR GSM (CELLULAR) LOGGER Instrukcja Użytkownika

RTR-500NW/AW Configuration Guide Before You Start Ver. 1.01 Take a few moments before you start to make the following simple checks. A few moments sp

11. Send Recorded Data SettingsThis is the screen where downloads of the data recorded by the loggers are enabled, the frequency of downloads is speci

Important Note: The RTR-500W will show an error condition (DIAG LED blinking) unless it is set to perform at least one action (Send Current Readings,

*Determining Router & Server IP Addresses Key addresses for your router and ISP server can be obtained from your computer. In order to disp

*Determining E-Mail Authentication TypeThis procedure can be used with many E-Mail servers to determine what authentication will be accepted. 1) Open

Starting the RTR-500W Settings Utility I) Getting Started1. After installing RTR-500W for Windows on your PC go to the Start Menu and launch the RTR-5

The RTR-500W Settings Window II) The Settings ProcessMaking settings to control the operation of the RTR-500NW/AW is a remarkably straightforward proc

2. Remote Unit SettingsThe Remote Unit Settings screen is used to register loggers to the system. When a logger is placed on the 500W you can set, vi

4. Wireless Route SettingsIn this screen we can see that this system has two Loggers and one Repeater registered. Initially after registration the so

5. Clock SettingsThere’s not a lot to say about this screen that isn’t already self-evident, with the possible exception of a comment about the necess

7. Email Settings This screen is where you make the settings for the server you will be using to send Emails for Warnings, Data Downloads or Current

8. FTP SettingsThis screen is where you make the settings for transferring data from your loggers to an FTP server, should you choose to do so. The F

If you select FTP you should be aware that if you choose <base> for the File Name each upload will overwrite the previous one, so that there wil